2000W Enderdrive Inverter Charger. 12V 80A

With state of the art, easy to use design, this product will offer you True Sinewave AC power for your RV, Marine, 4WD and remote power needs, whilst also recharging your battery automatically when 240V AC is available.
$2,499.00
In stock
Product Code
R1977
You save $25 - $50

Enderdrive 2000W/80A 12V Inverter Charger

The Sinewave Inverter-Charger can run multiple 240V AC-powered appliances when you need AC power off-grid. The multi-stage battery charger offers charging profiles for multiple different types of batteries. The built-in transfer switch will automatically switch between 240V mains supply when available and battery power when 240V mains is not available.

Also included in the unit is a RCD Safety Switch. This switch monitors the flow of electricity through the inverter and detects any problems that may pose a risk to personal safety and switches the output power off within 0.03 of a second.

The 12V 2000W/80A Inverter-Charger is suitable for appliances that use up to 2000W of power for operation, such as induction cooktops, microwaves, coffee machines and more. 

Features: 

Seamless 16A AC Internal Transfer Switch
AC RCD/Safety Switch with test button
Remote Control Display Panel
Regulated Pure Sine Wave Output
Quiet Operation
Compact Size for Easy Installation
Variable settings offered for Gel, Flooded, AGM, and Lithium battery compatibility.
Multi-stage charging ensures batteries are charged to their manufacturer’s recommendations.
Lightweight compact design
Built-in load sense to minimize battery drain

Specifications: 

Charger Output Current (Maximum): 80A
AC Output Power: 2000W
AC Output Current: 8.7A    
AC Output Voltage: 230VAC
AC Output Waveform: True Sinewave (<3% THD)
Nominal DC Input Voltage: 12.5Vdc
DC Input Voltage operating range: 10.5 – 16.5 VDC
Under Voltage Alarm: 11.0/12.5 VDC
Under Voltage Shutdown: 10.5/12.0 VDC
Over Voltage Shutdown: 16.5 VDC
Transfer Relay Rating: 16A
AC Input socket IEC-C20: 16A Heavy Duty Connector
AC Output socket IEC-C19:16A Heavy Duty Connector
Operating Temperature: 0°C to 40°C
Storage Temperature: -20°C to 60°C
Relative Humidity: 5 - 90% non-condensing
Operating Altitude: Up to 3000m above sea level
Weight: 8kg
Dimensions (mm): 440.7W x 307H x 108D
Warranty: 5 Years

More Information
Weight8Kg
Dimensions (mm) 440.7W x 307H x 108D
Warranty5 Years
Input voltage range10.5 – 16.5 VDC
Write Your Own Review
You're reviewing:2000W Enderdrive Inverter Charger. 12V 80A
Your Rating

FOR ORDERS UNDER $399 VALUE:

     Urban Delivery $9.90
     Rural Delivery $14.90

FOR ORDERS OVER $399 VALUE: Free Delivery *

* We reserve the right to revise the free delivery offer on some bulky items (for example, a large fridge travelling to Te Anau). In this case, we will endeavor to offer a subsidized freight cost. If the delivery address is outside the North and South Islands (eg. Waiheke, Great Barrier, Stewart Islands), please contact us for a freight quote.

WE ONLY SEND ORDERS WITHIN NEW ZEALAND. If the delivery address is outside the North or South Islands (eg. Waiheke, Great Barrier, Stewart Islands), please contact us for a freight quote. Our automated online freight pricing only applies to North & South Island locations.

DELIVERY TIMES  Due to the current outbreak, we are experience some disruptions to our normal service. Order dispatch and delivery times are being impacted by workforce sickness and isolation requirements for staff throughout our team and our supply chain. Although we use many courier options, the below NZ Couriers Network Status will give a good indication which regions are experiencing significant freight delays

https://www.nzcouriers.co.nz/network-status/

As a general rule, please allow an additional 3 working days for the below estimates (which may be extended by factors outside our control).

     North Island (2-4 working days)
     North Island Rural (3-5 working days)
     South Island (2-5 working days)
     South Island Rural (3-6 working days)