Viewtech 7" Reversing Camera Kit with Dual Camera. For Motorhomes
Viewtech Dual Reversing Camera for Motorhomes
The Viewtech 7" RV monitor is cleanly designed for the most decernng motorhome owner. An aesthetically looking front panel and touch type buttons mean this system will look great in all types of motorhomes and campervans. The monitor can be mounted either by the included contourable dash/windshield mount or U-bracket for both overhead or normal mounting. A super high 800 x 600 and 400mc/d2 brightness ensures you will be able to to see exceptional detail day or night.
Dual Lens Camera
The Viewtech VT6672D dual lens camera has two seperate camera units. One for wide view and a second narrow view camera which replicates the view of a rear vision mirror. The wide angle unit can be set to automatically activate when backing and the narrow unit can be used to check traffic behind vehicles that have no rear view mirror. The camera modules cleverly interlock so there is no way they can adjust themselves from vibration.
Connections to cameras are all made via waterproof 4-pin screw type connections and the camera also comes with a rubber cable shroud and gromet for entry through an external surface.
Wide Dynamic Input Voltage Range
Features well designed DC circuitry primarily designed for 24V systems. A wide 10V-36V input range to handle voltage drops and spikes. Each camera output has smoothed 12V supply for perfect camera operation.
True Day / Night Imaging
The Viewtech VT6672D camera included with this kit has a special day/night lens. This lens uses a special filter to automatically filter out colour distorting IR during the day but then at night alternates to produce crystal clear infrared night vision image. This creates perfect day time colour and incredibly clear night vision.
Easy To Install
This kit is incredibly easy to install. All electrical contacts are done at the monitor end which includes the red '+' & black '-' connection and a third reverse light sense wire which is optional to connect if you would like the system to power up when reverse is selected. All camera connections are done out of the monitor via ONE 4-pin cable. This makes installation very straight forward and a lot easier than you think.
This system is very versatile and can be installed in any bus, truck or other vehicle. For 5th wheelers and trailer units an optional trailer coupler is also available. System is powered from 12V-24V-32V and all cables are screw connections which are all waterproof. Powering to the cameras is done automatically by the monitor regardless of the input voltage.
|Monitor screen size / type||7" Colour|
|Monitor operating voltage||10 to 32 Volts DC|
|Monitor power input||12 watts|
|Monitor dimensions (mm)||200W x 140H x 34D|
|Camera resolution||280 000 pixels|
|Camera light sensitivity||0 Lux|
|Camera picture angle||Reversing Camera: 120 deg. Traffic Camera 90deg|
|Camera dimensions (mm)||115 x 70 x 70|
FOR ORDERS UNDER $199 VALUE:
Urban Delivery $7.90
Rural Delivery $12.90
FOR ORDERS OVER $199 VALUE: Free Delivery *
* We reserve the right to revise the free delivery offer on some bulky items (for example a large fridge travelling to Te Anau). In this case we will endevour to offer a subsadised freight cost. If the delivery address is outside the North and South Islands (eg. Waiheke, Great Barrier, Stewart Islands), please contact us for a freight quote.
WE ONLY SEND ORDERS WITHIN NEW ZEALAND. If the delivery address is outside the North or South Islands (eg. Waiheke, Great Barrier, Stewart Islands), please contact us for a freight quote. Our automated online freight pricing only applies to North & South Island locations.
DELIVERY TIMES are estimates only and may be extended by factors outside of our control.
North Island (1-2 working days)
North Island Rural (2-3 working days)
South Island (1-3 working days)
South Island Rural (2-5 working days)